Carriage Frame Assembly - OKIDATA ML320 Service Manual

3.2.16 Carriage Frame Assembly

Perform these procedures first:
- 3.2.01 ( )
- 3.2.03 ( )
- 3.2.04 ( )
- 3.2.14 ( )
- 3.2.15 ( ).
- Detach the head clamp (1).
- Use a flat-blade screwdriver to release the tabs of the ribbon protector (2).
- Remove the ribbon protector.
- Push the carriage shaft clamp (3) in the direction of arrow A.
- Lift the carriage shaft (4) at position B.
- Remove the carriage shaft from the guide hole by pulling at position C.
- Remove the carriage shaft, with the carriage frame (5).
- Slide the carriage frame off the carriage shaft.
Service Guide ML320/ML321
Chapter 3 Maintenance & Disassembly
Page: 63