Erase Batch Memory; Rf Batch Mode Transmit Delay - Datalogic PowerScan PD9530 Product Reference Manual

Enter/Exit Programming Mode

Erase Batch Memory

When the scanner is configured in Manual Batch Mode, use the following bar
code to erase any labels stored in batch memory.

RF Batch Mode Transmit Delay

Specifies the delay in 10 msec increments between transmitting labels
stored in batch memory.
DEFAULT
$CBTTD05(CR)
RF Batch Mode Transmit Delay = 50 mS
$CBTTD32(CR)
RF Batch Mode Transmit Delay = 0.5 seconds
$CBTTDFA(CR)
RF Batch Mode Transmit Delay = 2.5 seconds
216
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
BatchClear
Erase Batch Memory
$CBTTD00(CR)
RF Batch Mode Transmit Delay = No Delay
$CBTTD0A(CR)
RF Batch Mode Transmit Delay = 100 mS
$CBTTD64(CR)
RF Batch Mode Transmit Delay = 1 second
PowerScan™ PD9530/PBT9500/PM9500