Code 39 Set Length 2 - Datalogic PowerScan PD9530 Product Reference Manual

Enter/Exit Programming Mode

Code 39 Set Length 2

This feature specifies one of the bar code lengths for
trol. Length 2 is the maximum label length if in
second fixed length if in
check, data, and full-ASCII shift characters. The length does not include
start/stop characters.
Table 5
instructions on setting this feature.
Table 5. Code 39 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 39 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING .MODE
$CC3L2
Select Code 39 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
108
Fixed Length
provides examples for setting Length 2. See
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Code 39 Length Con-
Variable Length
Mode. Length includes the bar code's
page 268
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
PowerScan™ PD9530/PBT9500/PM9500
Mode, or the
for detailed
50 Characters
'5' AND '0'