Enter/Exit Programming Mode
Power On Alert
Disables or enables the indication (from the Beeper) that the reader is
receiving power.
$CBPPU01(CR)
Power On Alert = Power-up Beep
Good Read: When to Indicate
This feature specifies when the reader will provide indication (beep and/or
flash its green LED) upon successfully reading a bar code.
$CBPIN01(CR)
Indicate Good Read = After Transmit
66
LED AND BEEPER INDICATORS
DEFAULT
$CBPPU00(CR)
Power On Alert = Disable (No Audible Indication)
DEFAULT
$CBPIN00(CR)
Indicate Good Read = After Decode
$CBPIN02(CR)
Indicate Good Read =
After CTS goes inactive then active
PowerScan™ PD9530/PBT9500/PM9500