Wireless Beeper Features; Good Transmission Beep; Beep Frequency - Datalogic PowerScan PD9530 Product Reference Manual

Several options are available to configure beeper behavior for RF operation.

Good Transmission Beep

Enables/disables the Good Transmission Beep indication. When enabled, a
beep occurs when a Label is correctly transmitted to the base.
$CBTAB01(CR)
Good Transmission Beep = Enable

Beep Frequency

Adjusts radio-specific beep indications to sound at a low, medium or high
frequency, selectable from the list below (controls the beeper's pitch/tone).
DEFAULT
$CBTBF01(CR)
Beep Frequency = Medium
Product Reference Guide

WIRELESS BEEPER FEATURES

Enter/Exit Programming Mode
$CBTAB00(CR)
Good Transmission Beep = Disable
DEFAULT
$CBTBF00(CR)
Beep Frequency = Low
$CBTBF02(CR)
Beep Frequency = High
209