2D Structured Append; 2D Normal/Inverse Symbol Control - Datalogic PowerScan PD9530 Product Reference Manual

2D Global Features

2D Structured Append

Enables/disables ability of reader to append multiple 2D Codes labels in a
structured format. The structured append property is globally applied to the
following symbologies, if these are enabled:
•
•
•
•
DEFAULT
$CDESA01(CR)
Structured Append = Enable

2D Normal/Inverse Symbol Control

Specifies the options available for decoding normal/negative printed 2D
symbols. This configuration item applies globally to all the 2D symbologies
that support that feature according to Standard AIM Specification: Data
Matrix, QR, MicroQR, Aztec and Chinese Sensible Code.
To decode all symbologies, including linear symbologies, refer to
Negative Image" on page 78
$CIPNR01(CR)
Normal/Inverse Symbol Control = Inverse
DEFAULT
Product Reference Guide
Data Matrix
Aztec
QR Code
PDF 417
Enter/Exit Programming Mode
$CDESA00(CR)
Structured Append = Disable
D Symbology Selection
$CIPNR00(CR)
Normal/Inverse Symbol Control = Normal
$CIPNR02(CR)
Normal/Inverse Symbol Control =
Both Normal and Inverse
"Decode
175