2D Symbologies; 2D Global Features - Datalogic PowerScan PD9530 Product Reference Manual

2D Maximum Decoding Time on page
174
2D Structured Append on page 175
The reader supports the following 2D symbologies (bar code types). Sym-
bology-dependent options for each symbology are included in this chapter.
See "1D Symbologies"
Aztec Code on page 176
China Sensible Code on page 179
Data Matrix on page 182
Maxicode on page 186
PDF417 on page 189

2D Global Features

The following features are common to all, or in some cases, most of the
available 2D symbologies. Default settings are indicated at each feature/
option with a green arrow. Also reference
a listing of the most widely used set of standard factory settings. That sec-
tion also provides space to record any custom settings needed or imple-
mented for your system.
To set most features:
1. Scan the ENTER/EXIT PROGRAMMING bar code at the top of applicable
2. Scan the correct bar code to set the desired programming feature or
3. If additional input parameters are needed, go to
Complete the programming sequence by scanning the ENTER/EXIT PRO-
GRAMMING bar code to exit Programming Mode.
Product Reference Guide

2D SYMBOLOGIES

starting on page 81 for configuration of 1D bar codes.
programming pages.
parameter. You may need to cover unused bar codes on the page, and
possibly the facing page, to ensure that the reader reads only the bar
code you intend to scan.
and scan the appropriate characters from the keypad.
Additional information about many features can be found in the "Ref-
erences" chapter.
If you make a mistake before the last character, scan the CANCEL bar
code to abort and not save the entry string. You can then start again
at the beginning.
2D Global Features
2D Normal/Inverse Symbol Control on
page 175
Micro PDF417 on page 192
QR Code on page 195
Micro QR Code on page 197
UCC Composite on page 200
Postal Code Selection on page 202
Appendix C, Standard Defaults for
Appendix D, Keypad,
173