Beep Volume; Disconnect Beep - Datalogic PowerScan PD9530 Product Reference Manual

Beep Volume

Selects the beeper volume (loudness) of radio-specific beep indications.
There are three selectable volume levels.
$CBTBV00(CR)
Beep Volume = Low
$CBTBV02(CR)
Beep Volume = High

Disconnect Beep

Enables/disables the beep indication that a handheld has become con-
nected or disconnected from a Base Station.
$CBTDB01(CR)
Disconnect Beep = Enable
Product Reference Guide
The defaults are different for the STAR and Bluetooth models.
Enter/Exit Programming Mode
$CBTBV01(CR)
Beep Volume = Medium
DEFAULT
$CBTDB00(CR)
Disconnect Beep = Disable
DEFAULT
211