Replacing The Sprocket Guard - Invacare xlt User Manual

9 SERVICE PROCEDURES

9.12 Replacing the Sprocket Guard

All XLT PRO Handcycles
1. Remove the two socket screws securing the existing sprocket guard mounting bracket to the hand crank assembly.
2. Secure the new sprocket guard mounting bracket to the hand crank assembly using the two socket screws.
XLT, XLT Jr., Excelerator and Li'l Excelerator with Mountain Bike Option
1. Remove the two screws, nuts and washers securing the existing sprocket guard to the hand crank assembly.
2. Secure the new sprocket guard to the hand crank assembly using the two screws, nuts and washers.
XLT PRO
Sprocket Guard
Sprocket
Guard
Mounting
Bracket
Invacare® Top End® Recreation Handcycles
Hand Crank Assembly
Socket
Screws
XLT, XLT Jr., Excelerator, Li'l Excelerator
with Mountain Drive Option
Sprocket Guard
72
Hand Crank Assembly
Washer
Screw
Part No 1171891
Nut