Safety Inspection/Troubleshooting; Safety Inspection Checklist - Invacare xlt User Manual

4 Safety Inspection/Troubleshooting

 Every six months or as necessary, take your handcycle to a qualified technician for a thorough inspection and servicing. Regular cleaning
will reveal loose or worn parts and enhance the smooth operation of your handcycle. For safe and proper operation, your handcycle
MUST be cared for just like any other vehicle. Routine maintenance will extend the life and efficiency of your handcycle.
4.1

Safety Inspection Checklist

Initial adjustments should be made to suit your personal body structure and preference. Thereafter follow these maintenance procedures:
Inspect/Adjust Initially and Weekly
Inspect for bent or broken frame.

Inspect parking brake - Adjust brake shoes to front rim. Check for worn or missing shoes. Check for wax or oil on rim.

 Ensure cable anchor is attached securely to brake arm.
 Ensure the brakes are working before you begin a ride. When fully applied, the handcycle should come to a complete stop.
CAUTION
As with any vehicle, the wheels/castors and tires should be checked periodically for cracks, flat spots and wear, and should be replaced.
 Ensure axle nuts are tight. Wheel should be centered in fork. Keep wheel bearings adjusted and keep spokes tight and wheel in proper alignment.
Inspect rim and fork assembly for damage.

Ensure axle nut and wheel mounting nuts are secure.

Ensure that the rear wheels are properly secured to the frame.

Inspect wheels for excessive side movement or binding when lifted and spun.

Inspect for flat spots, wear and proper inflation.

Inspect chain/chain guard for damage, rust, tension and stretch. Adjust if necessary. Lubricate each link (3-IN-ONE® oil or a quality bike lubricant).

Check for damage or looseness.
 Adjust shifter/brake cables according to shifter/brake manufacturer's instructions (included with the handcycle).
Inspect front fork. Keep tight and lubricate (All purpose grease).

Inspect footrest mounting hardware is tight and footrest secure.

Inspect footrest straps for wetness and/or damage.

Inspect seat positioning strap (if installed) for any signs of wear. Ensure buckle latches or hook and loo fastener is secure. Verify hardware that

attaches strap to frame is secure and undamaged. Replace if necessary.
Part No 1171891
4 SAFETY INSPECTION/TROUBLESHOOTING
27
Invacare® Top End® Recreation Handcycles