Invacare xlt User Manual page 47

Excelerator Series:
Excelerator Series - To ensure proper fit, adjust the height of the footrest BEFORE adjusting the sliding seat. The seat should be

adjusted so when seated with the users feet are in the footrests, there is a 90°bend at the knee.
 The parking brake might need to be removed before seat adjustment and then reassembled to the handcycle once the seat is
adjusted to the desired position. Refer to on page 74.
• Activate the parking brake.
• Grasp forward/rearward adjustment lever and push it to the
right and slide seat forward or rearward. If necessary, hold
onto the hand crank to stabilize your body while adjusting seat.
• Ensure that the seat is properly engaged into the seating
position you desire by "jiggling" the seat, making sure that the
seat engages into the locking notch and adjustment lever
returns to its original forward facing position.
Part No 1171891
Excelerator Series
47
Invacare® Top End® Recreation Handcycles
7 RIDING POSITION
Adjustment Lever