Replacing The Chain Guard Cover - Invacare xlt User Manual

9.11 Replacing the Chain Guard Cover

XLT, XLT Jr., Excelerator and Li'l Excelerator
 This procedure applies Excelerator, Li'l Excelerator, XLT and XLT Jr. handcycles without the mountian bike option.
This procedure is for replacing the chain guard cover only. If the entire chain guard assembly needs to be replaced, special tools are
required. Take the handcycle to a bike repair shop.
1. Remove the two screws securing the existing chain guard cover to the chain guard mounting bracket.
2. Remove the screw securing the fork mounting bracket to the chain guard cover.
3. Remove the existing chain guard cover from the handcycle.
4. Install the new chain guard cover onto the handcycle.
5. Secure the bottom of the new chain guard cover to the fork mounting bracket using the existing screw.
6. Secure the top of the new chain guard cover to the chain guard mounting bracket using the two screws.
Bottom Screw
(Not Shown)
Chain Guard
Mounting
Bracket
Part No 1171891
XLT and XLT Jr.
Top Screw
Chain Guard Cover
Screw
Fork Mounting Bracket
Excelerator and Li'l Excelerator
Bottom
Screw (Not
Shown)
Chain Guard
Mounting Bracket
71
9 SERVICE PROCEDURES
Top Screw
Chain Guard Cover
Invacare® Top End® Recreation Handcycles