Riding Position; Using Footrest Strap; Adjusting The Footrest - Invacare xlt User Manual

7 Riding Position

WARNING - RISK OF INJURY OR DAMAGE
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or
damage may occur.
7.1

Using Footrest Strap

WARNING - RISK OF INJURY
OR DAMAGE
Footrest straps MUST be inspected before each use.
Exposure to moisture (i.e.- wet weather or puddles)
will damage fastening strips. Footrest strap will not hold
feet securely in footrest if fastening strips are damaged.
DO NOT operate handcycle if footrest straps are wet
or damaged, otherwise severe injury may occur.
ALWAYS wear shoes and securely strap feet in using
straps provided. Severe injury may occur if feet are not
secured while the handcycle is in motion.
XLT Series
1. Place feet in footrests.
2. Secure feet to footrest strap using small fastening straps.
7.2

Adjusting the Footrest

XLT Series
1. Remove the hex bolt and locknut that secure the footrest to the fork.
2. Slide footrest to desired position.
3. Reinstall hex bolt and locknut. Tighten securely.
4. Repeat STEPS 1-3 for the opposite footrest if necessary.
Part No 1171891
Fastening Straps
XLT Series
Fork
Clamp, Hex, Bolt
and Locknut
43
Invacare® Top End® Recreation Handcycles
7 RIDING POSITION
Footrest
Footrest Strap
Footrest