Replacing The Footrest/Footplates - Invacare xlt User Manual

9.15 Replacing the Footrest/Footplates

XLT Series
 Before disassembly, take note of footrest position.
1. Remove the hex bolt and locknut that secure the footrest to the fork.
2. Remove existing footrest from clamp.
3. Insert new footrest into clamp.
4. Slide footrest to desired position.
5. Install hex bolt and locknut. Tighten securely.
6. Repeat STEPS 1-5 for the opposite footrest if necessary.
Excelerator Series
1. Remove the button screws and locknuts that secure the footrests to
the footplate clamps.
2. Align a new footplate on the footplate clamp at the desired depth.
3. Line up the mounting holes in the footplates with the mounting holes
in the footplate clamps.
4. Install the button screws into the mounting holes and tighten securely
with the locknuts.
Part No 1171891
XLT Series
Fork
Clamp, Hex, Bolt
and Locknut
Excelerator Series
77
Invacare® Top End® Recreation Handcycles
9 SERVICE PROCEDURES
Footrest
Footplate
Button Screw
Locknut