Invacare xlt User Manual page 32

5 INITIAL SETUP
4. Perform one of the following:
• XLT PRO - Adjust chain length if the hand crank has been adjusted by adding or subtracting links. Special tools are necessary and procedure
should be performed by a qualified technician. Refer to Installing/Adjusting Twenty-Seven Speed Cassette Chain on page 70.

If necessary, take the XLT PRO to a bike shop to adjust the chain length.
• All handcycles except XLT PRO - Adjust chain tension idler. Refer to Adjusting the Chain Tensioner on page 69.
5. Check brakes and parking brake function. Refer to Suggested Maintenance Procedures on page 29.
6. Perform one of the following:
• All handcycles except for XLT PRO - Pedal backwards to ensure reversing drum brake works properly.
• XLT PRO - Squeeze brake handle on hand pedal to ensure the brake is working properly.
7. Adjust seat and/or back if necessary. Refer to Adjusting the Seat on page 46 and Adjusting Back Angle on page 48 as necessary.

Adjust the backrest so the user has a slight bend in the elbow when extended or at the 3 o'clock position.
8. Check that all hardware is tight.
9. Assemble the safety flag by sliding the top half into the plastic midsection.
10. Mount safety flag in holder secured to back tube.
Invacare® Top End® Recreation Handcycles
32
Part No 1171891