Replacing Seat Upholstery - Invacare xlt User Manual

9.19 Replacing Seat Upholstery

WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or
damage may occur.
Upholstery MUST be inspected BEFORE each use. Exposure to moisture (i.e., wet weather or puddles) will damage fastening
straps/flaps/strips. DO NOT operate the handcycle if upholstery is wet or damaged, otherwise severe injury may occur.
1. Remove seat cushion and back upholstery (if applicable) from chair.
2. Unlatch the four fastening flaps that secure the seat upholstery to
the seat frame.
3. Remove the existing seat upholstery.
4. Install the new seat upholstery making sure that the three fastening
flaps that are in close proximity to one another are to the rear of
the seat frame.
5. Secure the four fastening flaps together.
6. Reinstall seat cushion and back upholstery (if applicable) onto chair.
Part No 1171891
Back Upholstery
Large Strap
towards rear of
Seat Frame
Fastening
Straps
81
Invacare® Top End® Recreation Handcycles
9 SERVICE PROCEDURES