Service Procedures; Installing Hand Crank Handles - Invacare xlt User Manual

9 SERVICE PROCEDURES

9 Service Procedures
WARNING
After any adjustments, repair or service and before use,
make sure all attaching hardware is tightened securely.
Otherwise injury or damage may occur.
9.1

Installing Hand Crank Handles

Horizontal Handles
1. Thread the handle into the hand crank (Detail "A").
2. Unscrew the handle to remove it from the handcrank.
Installing Tri-pin Quad Handles
1. Thread the bracket into the handcrank.
2. Use a 15mm wrench to thread handles and posts into the bracket.
Adjusting Tri-pin Quad Handles and Posts
 If necessary, the rider should hold the handle to determine
the proper position of the handles and posts. The wrist
should go between the two posts.
1. Loosen socket screws to adjust handle position (Detail "B").
2. Tighten socket screws to secure handles in desired position.
Invacare® Top End® Recreation Handcycles
DETAIL "A" - HORIZONTAL HANDLES/
DELRIN HANDLES
Horizontal Handle
DETAIL "B" - TRI-PIN HANDLES
Thread into Handcrank
Socket
Screw
54
Hand Crank
Bracket
Tri-Pin
Quad
Handle
Tri-Pin
Quad Posts
Part No 1171891