8.4
Replacing Camber Inserts
1.
Loosen, but do not remove the socket screws and clamps that secure the camber inserts to the camber bar.
2.
Remove the existing camber insert from the camber bar.
3.
Install the new camber insert into the camber bar.
4.
Adjust the toe in/toe out of the handcycle. Refer to Adjusting Toe In/Toe Out on page 52.
Camber
Insert
8.5
Replacing Tire Tube and Tuning/Replacement of Spokes
Invacare recommends that these procedures be performed by a qualified technician.
Part No 1171891
Clamp
Camber Bar
Socket Screw
53
Invacare® Top End® Recreation Handcycles
8 WHEELS
Frame