9.2
Installing Ovalized Aluminum Handles
WARNING
After any adjustments, repair or service and before use,
make sure all attaching hardware is tightened securely.
Otherwise injury or damage may occur.
Failure to install handle assembly properly could result in
injury.
It is recommended to inspect this assembly prior to and
after each use.
Screw handle into crankarm housing (right handle has right-handed
thread; left handle has left-handed thread).
Handle should spin freely with minimal play. If handle does
not spin freely, contact Top End Customer Service at the
phone number on the back cover of this manual.
Part No 1171891
Crank
Arm
Handle
Housing
55
Invacare® Top End® Recreation Handcycles
9 SERVICE PROCEDURES
Handle
Crank
Arm
Housing