7.6
Adjusting Back Height
This procedure applies to Excelerator and Li'l Excelerator models only.
1.
Remove the back upholstery from the handcycle. Refer to Replacing Back Upholstery on page 82.
WARNING
Push pin MUST protrude through hole in back cane.
Ensure that both back cane inserts are at the same height before reassembling the handcycle.
2.
Press the push pin on the back cane insert tube in and adjust the back height to one of three heights depending on original back height.
3.
Install the back upholstery onto the handcycle. Refer to Replacing Back Upholstery on page 82.
Part No 1171891
Back Cane
Push Pin
49
Back Cane Insert
Invacare® Top End® Recreation Handcycles
7 RIDING POSITION