Adjusting Hand Crank Height - Invacare xlt User Manual

7.3

Adjusting Hand Crank Height

WARNING - RISK OF INJURY
OR DAMAGE
DO NOT operate the handcycle if he hand crank
obstructs your view. If the hand crank obstructs your
view, adjust the height before using the handcycle -
otherwise, injury or damage may occur.
1. Loosen, but DO NOT remove the two set screws securing the
hand crank to the fork stem.
2. Move the hand crank assembly up or down on the fork stem until
you are comfortable with the position for operational purposes.
 The hand crank should be positioned so that when
the hand is toward the front of the handcycle, the
arm is slightly bent. The arm should NEVER be fully
extended (locked) at any point while cranking.
3. Tighten the hex nut to secure the hand crank in the desired
position.
4. Tighten the chain if necessary. Refer to Installing/Adjusting Seven
Speed Hub Chain on page 67 or Refer to Installing/Adjusting
Twenty-Seven Speed Cassette Chain on page 70.
Part No 1171891
45
Invacare® Top End® Recreation Handcycles
7 RIDING POSITION
Hand Crank
Set Screws
Fork Stem