Invacare xlt User Manual page 69

Adjusting the Chain Tensioner
WARNING
Idler MUST be adjusted to ensure proper chain tension. If proper tension is not present, chain may disengage from the chainring. If the
chain is noisy when at proper tension, loosen slightly. After the chain is assembled, start in first gear and on straghtaway.
Make sure the tensioner is aligned properly, otherwise the chain will fall off.

Repositioning the hand crank assembly loosens or tightens the chain in an up/down position.
1. Ensure the hand crank is adjusted to the proper height. .
2. Loosen the hex screw securing the adjustable chain idler.
3. Adjust the tautness of the chain by moving the adjustable chain tensioner in or out as shown in .
4. Tighten the hex screw to secure the adjustable chain tensioner in place.
Part No 1171891
Hex Screw
69
Invacare® Top End® Recreation Handcycles
9 SERVICE PROCEDURES
Adjustable
Chain Idler