Section 2: Installation and Setup
2.2.7 Powering Down
The projector can be powered down by using one of
the following methods:
Remote Keypad/Built-In Keypad
• Press and hold P
OR
• Press P
OWER
OR
• Press P
OWER
DOWN key.
NOTE:
second key is not pressed immediately, a
confirmation window will appear. The second key
press must be pressed within 1 second of the window appearing.
After powering down, the Status LEDs cycle and the LCD displays the message "Cooling Down", until
NOTE:
cool down is complete.
Web User Interface (UI)
1. From the Main Tab, Select Power>OFF.
down, see
Figure
2. Select Yes.
2-14
F
2-15 P
IGURE
OWER
twice
once, then immediately press the
For Step 2 and 3, if the
2-16.
S
F
OSITION
ETSCREW
LUSH
F
2-16 P
IGURE
OWERING
A window will display for confirmation on powering
NOTE:
D
/W
U
I
OWN
EB
SER
NTERFACE
Mirage M Series User Manual
020-100575-02 Rev. 1 (11-2010)