Christie Mirage M Series User Manual page 23

Table 2.1 WUXGA Vertical Offset Ranges
WUXGA Lens Description
Lens ILS 1.25-1.6SX+/1.16-1.49HD
Offsets are subject to ±7% centering tolerance.
NOTES: 1)
resolution x 100.
The horizontal position of the image can also be offset; that is moved to the left or right of optical center, by
adjusting the motorized lens mount. The amount of horizontal offset available depends on the lens installed
and if the image has already been vertically offset. Horizontal offset can be expressed as the percent of half the
image width or the number of pixels of shift to one side of lens center. Refer to
offset of each lens type.
Table 2.2 WUXGA Horizontal Offset Ranges
WUXGA Lens Description
Lens ILS 1.25-1.6SX+/1.16-1.49HD
Offsets are subject to ±7% centering tolerance.
NOTES: 1)
panel resolution x 100.
Mirage M Series User Manual
020-100575-02 Rev. 1 (11-2010)
Lens ILS 0.73:1SX+/0.67:1HD
ALL OTHER LENSES
Lens ILS 0.73SX+/0.67HD
ALL OTHER LENSES
Section 2: Installation and Setup
Lens Part Number
118-100110-XX
118-100111-XX
% Offset = # of pixels of offset/half vertical panel
2)
Lens Part Number
118-100110-XX
118-100111-XX
% Offset = # of pixels of offset/half horizontal
2)
Minimum Offset
Above or Below
Lens Center
±22% ±132 pixels
±82% ±492 pixels
±112% ±672 pixels
Table 2.2 for the horizontal
Minimum Offset
Above or Below
Lens Center
±6% ±58 pixels
±38% ±365 pixels
±54% ±518 pixels
2-9