Operation Mode Selector Knob And Start/Stop Switch (Foot Switch) - Brother KE100 Motor Drive User Manual

®
Operation mode selector knob and Start/Stop switch (Foot switch)
Operation mode
Selector knob
Continuous operation
5
Intermittent operation
101
Start/stop switch
(9
Foot sWitch)
Push S/S switch (Foot switch), the shuttle will move
continuously. Push S/S switch (Foot switch) again,
the shuttle will stop the operation.
While pushing the S/S switch (Foot switch), the shuttle
will move and stop at the end of operation range which is
previously set.
If you release the S/S switch (Foot switch) before
reaching to the end of range, the shuttle immediately
stops there.
*
Foot switch is available as an OPTIONAL PART.
When pushing S/S switch (Foot switch) first time after putting on the power
switch .
Whenever putting on the power switch, since the shuttle will be set to start from right
to left direction, make sure that the shuttle is on the right side and the carriage is off
the knitting work. (If the carriage is on the knitting work or you move the shuttle over
the operation range by hand, when pushing S/S switch (Foot switch), the shuttle will
move opposite direction and be stopped by over load.)
5030 030
==::1,
,Motor head
, /
~
!
,~~~~t'~"!':';'fI '"
1
I I I I I I --
~
@ Push S/S switch @ Check if the R direction
(Foot switch). indicator lamp lig~ts.
*
If you want to start the knitting from left
side, follow the instructions.
@
Move the connected carriage
to the left end of the work
by hand.
• Foot switch (Option)
The function of the foot switch is the
same as one for the S/S switch.
Insert the plug for the foot switch into the
second connector from the left at the
reverse side of the motor head.
11111
CD
Connect the shuttle with
the carriage.
11111
-15-