Operating Your Insert; The Use Of A Fire Screen; Your First Fires; Lighting Fires - Osburn 2000 Installation And Operation Manual

Table of Contents

Advertisement

  2000 Insert Installation and Operation Manual 
 
4 OPERATING YOUR INSERT 
4.1 THE USE OF A FIRE SCREEN. 
This insert has been tested for use with an open door in conjunction with a fire screen (AC01315, 
sold separately). Make sure the fire screen is properly secured on the insert to avoid any risk of  
sparks damaging your flooring. When the fire screen is in use, do not leave the insert unattended 
so that you can respond promptly in the event of smoke spillage into the room. Potential causes of 
smoke  spillage  are  described  in  Section  9  The  Venting  System  of  this  manual.  See  Appendix  6: 
Installing the Fire Screen (AC01315) for installation instructions. 
OPERATING  WITH  THE  FIRE  SCREEN  INCREASES  POSSIBILITIES  OF  GENERATING  CARBON 
MONOXIDE.  CARBON  MONOXIDE  IS  AN  ODOURLESS  GAS  THAT  IS  HIGHLY  TOXIC  AND  WHICH 
CAN CAUSE DEATH AT HIGH CONCENTRATION IN AIR. 
 
4.2 YOUR FIRST FIRES 
Two  things  will  happen  as  you  burn  your  first  few  fires;  the  paint  cures  and  the  internal 
components of the insert are conditioned.  
As  the  paint  cures,  some  of  the  chemicals  vaporize.  The  vapors  are  not  poisonous,  but  they  do 
smell  bad.  Fresh  paint  fumes  can also  cause  false  alarms in  smoke  detectors.  So,  when  you  first 
light  your  insert,  be  prepared  by  opening  doors  and/or  windows  to  ventilate  the  house.  As  you 
burn  hotter  and  hotter  fires,  more  of  the  painted  surfaces  reach  the  curing  temperature  of  the 
paint.  The  smell  of  curing  paint  does  not  disappear  until  you  have  burned  one  or  two  very  hot 
fires.  
Burn  one  or  two  small  fires  to  begin  the  curing  and  conditioning  process.  Then  build  bigger  and 
hotter  fires  until  there  is  no  longer  any  paint  smell  from  the  insert.  Once  the  paint  smell 
disappears, your insert is ready for serious heating. 
 
4.3 LIGHTING FIRES 
Each  person  who  heats  with  wood  develops  their  own  favorite  way  to  light  fires.  Whatever 
method  you  choose,  your  goal  should  be  to  get  a  hot  fire  burning  quickly.  A  fire  that  starts  fast 
produces  less  smoke  and  deposits  less  creosote  in  the  chimney.  Here  are  three  popular  and 
effective ways to start wood fires. 
16  _ _____________________________________________________________________________   

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2000 insertOb02011

Table of Contents