Appendix 2: Installing The Door Overlay - Osburn 2000 Installation And Operation Manual

2000 Insert Installation and Operation Manual
APPENDIX 2: INSTALLING THE DOOR OVERLAY
In order to complete the assembly of your Osburn 2000‐I wood insert, you need to install the door
overlay (A). See figure below for installation instructions:
1‐ Remove the wooden handle which is secured by a Philips type screw and a washer.
2‐ Position the overlay on the door frame and secure it in place from behind using the 4 screws
(B).
3‐ Once the overlay is installed, put back the wooden handle, the washer and screw in place.
Note: It is not necessary to remove the glass to install the overlay.
_ _____________________________________________________________________________ 4 7