And Baffle - Osburn 2000 Installation And Operation Manual

2000 Insert Installation and Operation Manual
APPENDIX 7: FIREBRICK LAYOUT AND INSTALLATION OF SECONDARY AIR
TUBES AND BAFFLE
54 _ _____________________________________________________________________________
1‐ Starting with the rear tube, lean and insert
the right end of the secondary air tube into
the rear right channel hole. Then lift and
insert the left end of the tube into the rear
left channel.
2‐ Align the notch in the left end of the tube
with the key of the left air channel hole.
Using a « Wise grip » hold the tube and lock
it in place by turning the tube as shown in
detail A . Make sure the notch reaches the
end of the key way.
3‐ Repeat steps 1 and 2 for the two tubes in
the back then install the baffle before
installing the two front tubes.
4‐ To remove the tubes use the above steps in
reverse order.