Log Length; Piece Size - Osburn 2000 Installation And Operation Manual

2000 Insert Installation and Operation Manual
only hardwoods are good to burn is outdated. Old, leaky cast iron stoves wouldn't hold a fire
overnight unless they were fed large pieces of hardwood. That is no longer true. You can
successfully heat your home by using the less desirable tree species and give the forest a break at
the same time.
3.2.3 LOG LENGTH
Logs should be cut at least 1" (25 mm) shorter than the firebox so they fit in easily. Pieces that are
even slightly too long make loading the insert very difficult. The most common standard length of
firewood is 16" (400 mm).
The pieces should be a consistent length, with a maximum of 1" (25 mm) variation from piece to
piece.
3.2.4 PIECE SIZE
Firewood dries more quickly when it is split. Large unsplit rounds can take years to dry enough to
burn. Even when dried, unsplit logs are difficult to ignite because they don't have the sharp edges
where the flames first catch. Logs as small as 3" (75 mm) should be split to encourage drying.
Wood should be split to a range of sizes, from about 3" to 6" (75 mm to 150 mm) in cross section.
Having a range of sizes makes starting and rekindling fires much easier. Often, the firewood
_ _____________________________________________________________________________ 1 3