2000 Insert Installation and Operation Manual
APPENDIX 4: FACEPLATE INSTALLATION
Remove the faceplate panels from their box and follow the installation instructions below:
1. Place the faceplate panels
with the finished side down
on a flat, soft, non‐abrasive
surface.
2. Assemble the faceplate trim,
attaching the mitered corners
with the corner brackets.
3. Line up the holes of the side
and top panels and secure
with the six (6) screws,
washers and nuts.
4. Slide the assembled trim over
the edges of the faceplate.
5. Secure trim to faceplate using
eight (8) "U" shaped clips
6. To complete the installation,
screw in place the faceplate
(A) on the faceplate extension
with the screw (B) provided
(see detail A).
50 _ _____________________________________________________________________________