Mounting The Inverter On The Bracket - Xantrex GT5.0-NA-240 Owner's Manual

Installation

Mounting the Inverter on the Bracket

2–8
Place the inverter's mounting hooks over the flanges on the bracket. Ensure the
inverter is seated properly, then secure the bottom of the inverter with appropriate
screws or anchors through the mounting slots.
Flange with
110 cm (43")
mounting slots
Figure 2-3 Placing the Inverter on the Mounting Bracket
100 cm (39")
Ground/floor
Ground clearance
required for outdoor
installation
975-0334-01-01