Installation
Installing the Mounting Bracket
Rectangular slots × 25:
8 × 30 (5/16 × 1
)
3/16
Mounting flanges
All measurements
in mm (inches).
13 (1/2) from side of bracket
to knockout center
Figure 2-2 Mounting Bracket and GT Inverter
2–6
Secure the mounting bracket to a vertical structure or surface. The GT Inverter
mounting hooks attach to the flanges on the mounting bracket. Mounting bracket
dimensions are shown in Figure 2-2.
If mounting more than one inverter, install each mounting bracket at least 150 mm
(6 inches) apart to provide enough space for the inverters to hang side by side.
Mounting bracket
253 (10)
Back side of the inverter
38 (1
) from
1/2
bottom of bracket
to knockout center
Mounting slots for
securing the inverter
Mounting hooks
975-0334-01-01