Offline Mode - Xantrex GT5.0-NA-240 Owner's Manual

Monitoring the Inverter

Offline Mode

Offline default
display
Offline messages
for all systems
5–6
At night and when no power is being produced by the PV array (offline mode), the
GT Inverter displays the screen shown in Table 5-5.
Table 5-5 Offline Mode Default Display
Display
Inverter
Offline
Additional message screens can be viewed when the system is offline by tapping
the inverter front panel. Each additional tap displays the next screen, in the order
shown in Table 5-6.
These message screens are common to all GT Inverter systems, no matter how
many units are installed. If you continue to tap the unit, then the LCD will
continue to cycle through all of the available offline mode screens.
Table 5-6 Offline Mode Screens for All GT Inverter Units
Tap Display*
1st time Inverter
Offline
2nd time System 0W
Today 2.50kWh
3rd time System Lifetime
305kWh
4th time Time Online
hh:mm:ss
* In a multiple unit system with communications cables properly installed, the
system values displayed are for the entire system. Time online is for the local
inverter.
Displayed at all times while the system is offline.
LCD back light turns on for better readability
and default Offline Mode screen is displayed.
Power being produced by the system now.
Cumulative energy produced by the system
today.
Lifetime energy produced by the system.
Total time that the system was online today, in
hours (hh), minutes (mm) and seconds (ss).
Description
Description
975-0334-01-01