Ground Fault Fuse - Xantrex GT5.0-NA-240 Owner's Manual

Ground Fault Fuse

975-0334-01-01
PV1 String #1 PV1 String #2
GT5.0 model shown. Other models have
a four-position terminal block and accept
up to two PV strings
Figure 3-2 Grounding Diagram
The GT Inverter is equipped with a 600 volt, 1 amp ground fault protection fuse
(replace with Littelfuse KLKD 1 or equivalent).
WARNING: Shock hazard
Do not attempt to service the ground fault protection fuse yourself. This should only be
done by qualified service personnel, such as certified electricians or technicians. See
"Replacing the Ground Fault Protection Fuse" on page 6–4.
PV1 String #3 (GT5.0 only)
L1 L2 N G
Grounding electrode
Grounding Requirements
L 2
L 1
Neutral
L1
L2
Ground
3–3