Monitoring The Inverter; Monitoring The Front Panel Display - Xantrex GT5.0-NA-240 Owner's Manual

5

Monitoring the Front Panel Display

During startup
During waiting
period
During operation
When the inverter is
offline or there is
fault condition
Monitoring the
Inverter
Chapter 5 contains information for understanding the LCD screens and the
LED indicators.
During startup, the inverter's front panel LCD (see Figure 5-1) shows the screens
described in Table 5-1, "Startup Screens on GT Inverter Front Panel Display" on
page 5–2.
When the 305 second protection timer begins, the inverter displays "Reconnecting
in sss seconds" (see Table 5-10, "Special Message Screens" on page 5–10).
When the protection timer stops, the GT Inverter begins delivering power,
indicated by the power output reading in the display (see Table 5-2, "Normal
Operation Default Screen" on page 5–4).
When the GT Inverter is offline (at night, for example) or a fault condition has
been detected, the LCD displays a message to indicate that the inverter is offline
and to identify the specific fault condition. See Table 5-5, "Offline Mode Default
Display" on page 5–6 and Table 5-8, "Fault Message Screens" on page 5–8.
Grid Tie Solar Inverter
Figure 5-1 Front Panel LCD
Tap the front panel for backlight
and status screens