Front Panel Features - Xantrex GT5.0-NA-240 Owner's Manual

Front Panel Features

975-0334-01-01
The wiring/disconnect box has been designed to be physically mated to the
electronics section of the GT Inverter at the factory, but remains in place as a
non-serviceable item in the event that the inverter electronics section is ever
required to be removed. The inverter and wiring/disconnect box together form
an NEMA 3R enclosure to allow outdoor installation.
WARNING: Shock hazard
The 600 volt DC/AC disconnect in the wiring/disconnect box meets NEC Article 690. It is
a non-serviceable component and shall remain in place. Separating the inverter and
wiring/disconnect box, or removing the wiring/disconnect box cover can expose
energized conductors. PV input circuits in the wiring box ahead of the switch remain
energized even when the switch is in the "off" position—hazardous voltage will still be
present on the DC input (PV) terminals under the clear plastic insulation barrier inside the
wiring/disconnect box.
Figure 1-2 Main Features of the GT Inverter
About the Xantrex Grid Tie Solar Inverter
Heat sink
LCD
LED indicator lights
Wiring/disconnect box
DC/AC disconnect switch
Mounting slots
1–3