Using Serial And Usb Communications - Intermec CN3, CN3e User Manual

Chapter 2 — Connecting and Configuring the CN3

Using Serial and USB Communications

42
2 Configure these network parameters:
• If you have a DHCP server, enable DHCP.
• If you do not have a DHCP server, set these parameters:
a IP address
b Subnet mask
c Default router
3 If necessary, set these parameters:
• Primary and secondary DNS servers
• Primary and secondary WINS servers
4 Make sure that your CN3 is communicating with the network and
that the network can see your CN3.
You can use these CN3 accessories to transmit data to and receive data
from another device through serial or USB communications:
• AD10 single dock
• AV10 vehicle dock
• AD11 multidock
• AA24 USB adapter
• AA17 RS-232 adapter
For more information about these accessories and how to order them,
see "Accessories" on page
CN3 Series Mobile Computer User's Manual for Windows Mobile 5.0
101.