Intermec CN3, CN3e User Manual page 93

Chapter 3 — Developing and Installing Applications
80
3 Remove the miniSD card from the adapter card and insert it into
the CN3.
4 Place the CN3 in a dock connected to external power and press the
Reset button (using a stylus) located in the battery cavity on the
back of the CN3. For help, see
page 93.
5 Remove the miniSD card when the Installation Complete menu
appears.
6 Remove the CN3 from the dock and replace the battery.
To upgrade the SSPB using a miniSD card
1 Insert a miniSD card into a miniSD adapter card and then place it
in the storage card reader connected to your PC.
2 Copy all required SSPB upgrade files to the miniSD card.
3 Remove the miniSD card from the adapter card and insert it into
the CN3.
4 Using the stylus, press the Reset button in the battery cavity on
the back of the CN3.
5 Press and hold the Power button as you insert the battery back
into the CN3.
6 Continue to hold the Power button until a Warning message
appears on the display.
7 Release the Power button, read the message, and press either
button on the right side to continue. Wait for the CN3 to load files
from the miniSD card.
8 When the progress is complete, the CN3 warm boots to reset the
configuration.
9 If you wish, you can now remove the miniSD card or delete the
files on the miniSD card. The information for the SSPB now
resides in the Flash File Store.
10 Set the date, time, and network communication parameters to
reestablish communications with the other devices in the wireless
network.
CN3 Series Mobile Computer User's Manual for Windows Mobile 5.0
"Cold Booting the CN3" on