Using The Battery - Intermec CN3, CN3e User Manual

Chapter 1 — Using the CN3

Using the Battery

4
To find your operating system version
1 Tap Start > Internet Explorer.
2 Tap the Intermec logo. The Intermec page appears and displays
the software build information.
The CN3 uses an AB8, AB9, AB15, or AB16 Lithium-ion (Li-ion)
battery as its main power source. The CN3e uses an AB9 or AB16
extended battery for the main power source. Standard batteries have
8.1 Watt hours capacity and extended batteries have 14.8 Watt hours
capacity. You must fully charge the battery before you can use the
CN3.
If you suspend the CN3 before changing the battery, an internal super
capacitor maintains your status, memory, and real-time clock for
approximately 5 minutes.
The battery used in this device may present a fire or chemical
burn hazard if it is mistreated. Do not disassemble it, heat it
above 100°C (212°F) or incinerate it.
If you fail to replace the low battery immediately, you may lose
important data or applications.
CN3 Series Mobile Computer User's Manual for Windows Mobile 5.0