Clean Booting The Cn3 - Intermec CN3, CN3e User Manual

Chapter 4 — Troubleshooting and Maintaining the CN3

Clean Booting the CN3

94
Locating the Reset Button on the CN3e
When you clean boot the CN3, it loads only those files and programs
that are absolutely required by the operating system. Use the clean
boot to troubleshoot the CN3 by getting it up and running so that
you can perform diagnostic tests to determine which elements of the
normal boot process are causing problems.
The clean boot process will erase the memory in the mobile
computer, including all applications and data files found in the
object store.
A clean boot will load files from the Flash File Store if an SSPB
files are not on a miniSD card. If SSPB files are on a miniSD card,
they will overwrite the files in the Flash File Store.
To clean boot the computer
1 Press the Power button to suspend the CN3.
2 Remove the battery pack from the back of the CN3.
3 With a stylus, press the Reset button on the battery cavity.
4 Press and hold the Power button as you insert the battery back
into the CN3.
CN3 Series Mobile Computer User's Manual for Windows Mobile 5.0
Reset button