Using The Color Camera - Intermec CN3, CN3e User Manual

Chapter 1 — Using the CN3

Using the Color Camera

26
a Tap Start > Settings > the System tab > Intermec Settings.
b Tap Data Collection > Internal Scanner > Imager Settings >
Predefined Modes and then select one of these options:
Predefined Mode
1D
1D and 2D Standard All types of bar code labels.
1D and 2D Bright
Environment
1D and 2D Reflective
Surface
Custom
The color camera with flash is an optional feature that is
factory-installed into the upper back of the CN3, as shown in the
following illustration.
Color camera
Color Camera and Flash
CN3 Series Mobile Computer User's Manual for Windows Mobile 5.0
Select if You Are Scanning:
Only 1D labels.
In high ambient light, such as outdoors in
the sunshine.
Glossy labels.
In conditions that require customized
settings. For more information about these
settings, commands, and parameters, see the
Intermec Computer Command Reference Manual
available from the Intermec web site at
www.intermec.com.
Flash