Intermec CN3, CN3e User Manual page 96

CN3 Series Mobile Computer User's Manual for Windows Mobile 5.0
Make sure that the CN3 does not suspend during the download
or errors could occur.
When the file download is complete, the CN3 performs a warm boot
and starts to install the upgrade files. After the OS file installation is
completed, the CN3 warm boots again and the Windows Mobile
welcome screen appears. You will need to recalibrate the screen at this
time.
To upgrade the SSPB
1 Connect your the CN3 to your network that has the SmartSystems
Server installed.
2 Install SmartSystems Foundation on your desktop or laptop
computer, then double-click the icon on your toolbar to start the
SmartSystems Console.
3 Double-click the SmartSystems icon on your taskbar to start the
SmartSystems Console.
4 Click the Discover icon on the SmartSystems Console. Your CN3
should appear in the Keypad Computers area of the screen.
5 Click and drag the SSPB bundle from the Software Vault and drag
to the CN3 icon. Release the SSPB bundle on the device icon.
6 Click the Yes button when the SmartSystems message appears.
The SmartSystems Server will start transferring files to the CN3. A
white screen with text on it will appear on the CN3 icon as the files
are being downloaded.
Make sure that the CN3 does not suspend during the
download or errors could occur.
When the file download is complete, the CN3 performs a warm boot
and starts to install the upgrade files. When the Today screen appears,
SSPB file installation begins. After all files are installed, you will need
to reconnect the CN3 to your network.
Chapter 3 — Developing and Installing Applications
83