Intermec CN3, CN3e User Manual page 31

Chapter 1 — Using the CN3
18
Changing the Volume of the Rear Speaker
Way to Adjust Volume
Tap the Volume (
the navigation bar.
Use Intermec Settings.
Press the side volume control. Press the top of the side volume control to
Note: For detailed information on the commands available in
Intermec Settings, see the Intermec Computer Command Reference
Manual (P/N 073529-xxx) available from the Intermec web site.
The CN3 has a built-in vibrate feature that enables you to receive
scanner feedback despite the noise level. When enabled, the CN3
vibrates when the scanner performs a good read or when the phone
receives a call.
To enable the vibrate feature
1 Tap the Volume (
CN3 Series Mobile Computer User's Manual for Windows Mobile 5.0
Procedure
) icon in Use the stylus to move the volume slider up
or down for the computer. You can also turn
the volume on or off and choose to use
Vibrate mode.
From the Start menu, choose Settings > the
System tab > Intermec Settings. Go to
Device Settings > Beeper > Volume. Select
the setting you prefer and save your changes
before exiting. For help, see
the CN3 With Intermec Settings" on
page 35.
turn the volume up. Press the bottom of the
side volume control to turn the volume
down.
) icon at the top of the screen.
"Configuring