Using The Power Button; Configuring The Backlight Settings - Intermec CN3, CN3e User Manual

Using the Power Button

Configuring the Backlight Settings

CN3 Series Mobile Computer User's Manual for Windows Mobile 5.0
When you press the Power (
power mode. In this lower power mode, the CN3 continues to supply
power to all memory, but turns off power to most hardware such as
the display. This power-saving feature is designed to prolong battery
life.
Note: If you do not have a SIM card installed, it may take up
to 30 seconds for the CN3 to suspend.
By default, the CN3 goes into Screen Off mode when there is no
activity on the computer. Screen Off mode turns off the backlight and
display. Press a key or tap the screen to resume activity.
It is possible to override the backlight settings by changing the power
management settings. For more information on configuring power
management, see the next section, "Managing Power on the CN3."
To configure the backlight
1 Tap Start > Settings > the System tab > the Backlight icon > the
Battery Power tab.
2 With Turn off backlight if device is not used for checked, select
the timeout value (10 seconds, 30 seconds, or 1 to 5 minutes).
Chapter 1 — Using the CN3
) button, you put the CN3 into a lower
15