Intermec CN3, CN3e User Manual page 35

Chapter 1 — Using the CN3
22
If the touch screen is so out of alignment that you cannot open the
Start menu, you may need to align the screen menu using only the
keypad or as a last resort you can perform a clean boot. For more
information about performing a clean boot, see
CN3" on page 94.
To align the touch screen using the keypad
1 Press the Windows button on the upper left of the keypad.
2 Press the Down button to select Settings.
3 Press Enter.
4 Press the Tab button until the Settings tabs are highlighted.
5 Press the Right Arrow button to select the System tab (on some
keypads this will be the orange button and down button).
6 Press tab until the Screen icon is highlighted.
7 Tab to Align Screen and press Enter follow the instructions to
align the screen.
8 Click ok.
CN3 Series Mobile Computer User's Manual for Windows Mobile 5.0
"Clean Booting the