Set The Ip Address - Comtech EF Data Vipersat 564L User Manual

I n i t i a l C o n f i gu r a t i o n
5.
Hub
Hub Expansion
Remote Expansion
6.

Set the IP Address

1.
2-6
When the reboot is completed, return to the Feature Configuration menu
and configure the settings for Vipersat STDMA and Auto Switching
according to the table below.
Table 2-2
Unit Role
Save the settings to flash by entering S at the command prompt.
From the Main Menu, enter I to access the Interface Configuration menu
screen, then enter E to access the Ethernet Interface screen.
Figure 2-5
Working Mode dialog
Vipersat Feature Configuration
Vipersat
Enabled
Enabled
Enabled
V i p e r s a t C D D - 5 6 X S e r i e s U s e r G u i d e
STDMA Auto Switching
Enabled (optional) Enabled
Disabled Disabled
Disabled Disabled