Figure 3-64 Udp Port Base Address Prompt - Comtech EF Data Vipersat 564L User Manual

V i p e r s a t C o nf i g u r a t i o n
Figure 3-64
UDP Port Base Address prompt
Caution: This command affects all communications for the VMS and STDMA.
If the base address is changed, it must be changed in the VMS as
well as in all modems in all networks controlled by the VMS. The base
address must also be changed when using VLOAD with this network.
V i p e r s a t C D D - 5 6 X S e r i e s U s e r G u i d e
3-50