Comtech EF Data Vipersat 564L User Manual page 116

I n t r o d u c t i o n
control algorithm is a closed loop servo-mechanism with the received E
values as the input function and the modulator's transmit power as the output
function. Only modulator transmit power is controlled by the algorithm since
the receive chain has its own automatic gain control. DPC can be applied to any
or all of the modems with the exception of the STDMA burst control demodula-
tors. Since the STDMA burst demodulators are SCPC fast acquisitions receivers
they cannot provide stable signal quality measurements (E
critical in closing the power loop control mechanism.
Note: STDMA is not susceptible to bursts at different power levels since it is a
NOTE
DPC is a modulator function that cannot be enabled in remotes operating in
STDMA mode. DPC is automatically turned on when the remote switches to
SCPC mode.
C-2
standard SCPC demodulator — as long as the input C/N burst power
ranges comply with the performance specifications of the modem. An
example is an operation using meshed video carriers.
V i p e r s a t C D D - 5 6 X S e r i e s U s e r G u i d e
/N
b o
/N ). This value is
b o