Setting The Session Timeout Value; Configuring Simple Network Management (Snmp); Configuring Snmp System Information - Cisco RV215W Administration Manual

Administering Your Router

Setting the Session Timeout Value

Setting the Session Timeout Value

STEP 1
STEP 2
STEP 3
STEP 4

Configuring Simple Network Management (SNMP)

Cisco RV215W Wireless-N VPN Firewall Administration Guide
The timeout value is the number of minutes of inactivity that are allowed before the
Device Manager session is ended. You can configure timeout for the Admin and
Guest accounts.
To configure session timeout:
Choose Administration > Session Timeout.
In the Administrator Inactivity Timeout field, enter the number, in minutes, before
a session times out due to inactivity. Choose never to allow the administrator to
stay logged in permanently.
In the Guest Inactivity Timeout field, enter the number, in minutes, before a
session times out due to inactivity. Choose never to allow the administrator to stay
logged in permanently.
Click Save.
Simple Network Management Protocol (SNMP) lets you monitor and manage your
router from an SNMP manager. SNMP provides a remote means to monitor and
control network devices, and to manage configurations, statistics collection,
performance, and security.

Configuring SNMP System Information

In the SNMP System Information section of the SNMP page, you can enable
SNMP.
Before you can use SNMP, install SNMP software on your computer. The device
supports only SNMPv3 for SNMP management and SNNPv1/2/3 for SNMP trap
messages.
11
125