Oce cm4520 User Manual page 187

3
– If the binding position for the copy is set to "Auto", the binding po-
sition is set at the top or at the left.
3
Touch [Binding Direction].
– For a single-sided document, select the binding position for the
copy, and then touch [OK].
– For a double-sided document, select the binding positions for the
document and the copy, and then touch [OK].
4
Touch [Original Direction], select the orientation of the loaded docu-
ment, and then touch [OK].
– For details on specifying the document orientation, refer to "Select-
ing the Document Orientation (Original Direction Settings)" on
page 3-25.
5
Touch [OK].
The Basic screen appears again.
3-56
Basic Copy Operations
cm4520